The Dancutter SuperFlex is an extremely flexible and user-friendly cutter that can work in pipe diameters from 75-150mm.

The SuperFlex stainless-steel frame contains 25 or 50m supply hose which the cutter is fixed directly on to. The supply hose is supplying air, sprinkler and power to the cutter and is used to push the cutter to the working position hereafter the control of the cutter takes place on the supplied control panel.

The Dancutter SuperFlex has a built-in slip ring to the camera, which allows 360° continuously rotation of the milling motor There is also built-in lock and slip ring on the stainless-steel frame, so the cutter can freely be moved back and forth with the supply hose, while working with and operating the cutter.

The camera has a side-mounted spray nozzle for cleaning the camera lens, which is activated on the control panel, from which the continuously rotation and forward/reverse movement of the cutter is controlled by the two joysticks. 

Cutter has a built-in forward/backward movement of 60 mm. Raising the milling motor is controlled also at one of these joysticks. There is a built-in 12.1 inch colour monitor in the lid of the control unit. The cutter can move through two successive 45° bends in a 75mm pipe, and a 90° bend/angle of a relined 110 mm pipe.

Wheels on the stainless-steel frame, provides an easy and hassle free movement to and from the workplace. There are mounted oil lubricates and water separator at the stainless-steel frame. 

Max water content delivered by compressor per m3 supply air should be maximum: 20g/m3 .

Cutting engine consists of an air motor, which runs at up to 15,000 revolutions per minute. It has an air consumption of 650 liters/minute and need 7 bar working pressure. The compact Cutters are made from a resistant stainless steel alloy - which gives a minimum maintenance of the cutter.

Please call Sewer Equipment Company Australia on 1800 028 584 for further details.